Share:
The FAVORIT W4L Water Still produces single-distilled water at a nominal output of 4 litres per hour for laboratory workflows.
FAVORIT W4L Water Still for Laboratory Distilled Water
The P21001 unit combines a heat-resistant borosilicate glass boiler, 3kW chromium-plated heater and high-efficiency coil condenser. Its stated distillate conductivity is 3.0 to 4.0 microS/cm, giving users a specific output characteristic to compare with their laboratory water requirements.
Bench or wall mounting offers layout flexibility, while the drainage valve supports descaling without dismantling the boiler assembly. Plan the water supply, electrical connection and maintenance access before selecting the FAVORIT W4L; the safety thermostat provides protection during water supply failure.
Water Distillation and Installation Features
- Brand: FAVORIT; model: W4L; catalogue number: P21001
- Distillate output: 4 litres per hour
- Heat-resistant borosilicate glass boiler with 3kW chromium-plated heater
- High-efficiency coil condenser
- Distillate conductivity: 3.0 to 4.0 microS/cm
- Distillate pH: 5.0 to 6.5; temperature: 35 to 50 degrees C
- Water supply requirement: 1 litre/minute, minimum 3psi
- Power: 220/240V, 50/60Hz, single phase, 13A fused
- Bench or wall mounting; dimensions (D x W x H): 50 x 15 x 45cm
- Drainage valve facilitates descaling; safety thermostat protects against water supply failure
Compare the stated output with your daily demand and analytical water specification.
Contact us to enquire about the FAVORIT W4L P21001 and installation requirements.
Inquiry - FAVORIT W4L Water Still
